HI I am running the 10-80m unit whilst mobile in a vehicle, unfortunately the GPS will not change the 6 figure square whils.t on the move. (A older version I have works fine). . So I put a manual 4 figure code and removed the /M suffix. I put in code IO92. I Saved the configuration. When I read back the data It does not display the 4 figure code. And when transmitting it appears to be fixed on my original code of IO92SA. model 10 to 80m. Hardware 2.6 Firmware 2.4 Version 1 rev 16 programming software , There doesnt appear to be a way of trying older firmware or programming software. ? Any Thoughts Dave G4FKI

I have updated the latest hardware and software. As a keen Hf mobile operator I am keen to use the 6 digit square. I have tried mobile operation with the gps connected and a lap top in use. I can see the position change locally on the Lap top. so I made s few mobile trips. It starts of as IO92SA from home. Then displays IO91 then shows IO92SA again where I know it should read IO92WA. Any thoughts. Thanks. Dave G4FKI.